Label Stock Cost and Speed Comparison Guide for Primera LX-Series Printers

• Related Articles

• How many labels per cartridge can I print? How can I calculate ink cost per label in Print Hub? (LX Series Printers)

  The cost estimator is found under the queue section on the first tab of the Print Hub on PC and on the first tab of the Config Utility on Mac. On PC the last five job costs are stored in the list. Each job will show the cost per label based on the ...

• How do I correctly load the label stock to avoid feeding and printed image alignment offset problems? (LX Series)

  Incorrect loading of the label stock is the number one reason for horizontally or vertically offset images and a variety of other feeding problems. Below is a top view of the printer with the cover open. There are several main areas to watch for when ...

• How to Create A Custom Label Order

  1. Go to https://www.primera.com/customlabel/generate/label/ 2. Select your printer type. 3. Then click Select Materials. View the material guide for more information on each material type of look at the pictures below. Premium Gloss Matte BOPP High ...

• Primera's new Smart Part format for Custom Label Stock Explained

  You can now see important information about your label stock embedded within the part number printed on a label inside the core.  Read below for instructions on how to decipher this smart part number. SMART PART: The format is: PRI (for Primera) – ...

• There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?

  A. Removal: Usually, to remove the stuck label, the printer must be disassembled. This means the unit will need to be brought to Primera for factory service. However, there are ways to remove these labels without disassembling the printer. 1. Use ...