How many discs can I print with one Z1 ribbon?

How many discs can I print with one Z1 ribbon?

How many discs can I print with one Z1 ribbon?

You can print an average of 200 print areas* with one ribbon. This equals fifty discs if you print all four areas on every disc, 100 discs if you only print two or 200 discs if you print one area on each disc.

*Depending on the amount of text or graphics in the print area, a different amount of ribbon is used so the print area number is variable. 200 print areas assumes a 1.674 inch average print that does not fill an entire print area with text or graphics. The entire ribbon is 334.92 inches long. If you were to fill every print area completely you would receive approximately 120 print areas (30 four print area discs).

Article ID: 44652

    • Related Articles

    • How many discs per cartridge can the Bravo/Bravo II print?

        How many discs per cartridge can the Bravo/Bravo II print? This depends on many factors. However, with 100% coverage and printing an even amount of each color at the default resolution of 1200 the Bravo/Bravo II prints approximately 100 to 130 ...

    • How many labels can I print with one LX800 cartridge?

      How many labels can I print with one LX800 cartridge? The number of labels you can print depends on a few different factors: Size of image Driver quality setting Cartridge settings Since this information can change from label to label, it is ...

    • What size/type cookies can I print to with my Eddie?

      The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...

    • Eddie Cookie Pro does not Print

      Issue: When you click print, nothing happens, or you get a spinning wheel. Solution: Click on the Settings Gear Icon. Either click Restore Defaults or manually set the saturation to a value of 40% or higher. Explanation: If you lower the saturation ...

    • The LX3000/LX4000 Print Head is printing with Poor Quality, Banding, Streaks, or Missing Colors.

      You may need to replace your print head. The nozzles can wear out over time. Tip! Leave the printer powered on when it is not in use to maintain cartridge readiness! 1. Clean / Test Print. Print the Clean/Test Print described in this article. Send us ...