How do I use my DTM Manual Feed Trays with the Eddie
How do I use my DTM Manual Feed Trays with the Eddie?
If you purchased manual plastic feed tray templates for your Eddie from DTM Print in Germany please visit the link below. You will need to download BarTender or NiceLabel Templates to use them. Also, watch the video for instructions.
Manual feed mode allows you to load cookies by hand directly to the print platform. This can be used for oversized or irregular shaped cookies that don't fit well on the carousel platter. To enable manual feed: 1. Update to the latest firmware 1.25 ...
Your cookie MUST be touching two triangle spacers. When using the carousel, Eddie will center print images on your cookies automatically but only if your cookie is touching two triangle spacers. (round spacer on earlier models). Install the outer ...
The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...
Custom trays can be a great way to expand the capabilities of your Eddie. Most of the amazing cookies you see printed on our Eddie Facebook group use some kind of custom Tray. There are many ways to use these trays. Refer to the manufacturers ...
If you receive this error after powering up Eddie, follow the steps below. If you receive this error in the middle of printing, it probably means that Eddie needed to restart for some reason and since it was in the middle of printing when it ...