How do I swap container guides, adjust liner idler roller clamping pressure or adjust liner rewinder torque (AP380)

• Related Articles

• How can I print on the far left side of the container using AP-Code with my AP360/AP362 applicator.

  The normal print area range of the AP-Code does not allow for printing on the far left side of the container. Typically we would recommend changing the orientation of the your label stock so that you can change the orientation of your container. ...

• Labels are applied to the container crooked. (AP360-AP362-AP380)

  1. Proper Setup. Please follow all of the setup steps in the Manual or the Setup Video. 2. Check for Container Taper. Some containers such as wine bottles may have a slight taper that will cause the label to be applied crooked. You may be able to ...

• How should I store the cartridge for my AP-Code Date coder when it is not being used?

  To prevent ink evaporation, when the cartridges is not being used, you should remove it from the printer, cap it using the included cartridge garage and store it in the zip-locked foil bag that it came with. For best results, follow this procedure ...

• The AP-Code Date Coder is not printing. Status is Ready, the container moves, the label is applied but nothing is printed.

  1. Ensure the Roller Track Wheel is installed properly so that it touches the liner drive roller. Watch the Printer Status screen. When you press the foot switch, the Printer State should change to "Printing". If the status remains on Ready, it means ...

• How do I cut the Magnetic Material for my LX610.

  The recommended starting knife pressure for the magnetic media is 22. This media is not meant to be cut all the way through because there is no liner. Instead, this knife pressure setting is meant to score the magnetic media so that it can be removed ...