1. Ensure the Roller Track Wheel is installed properly so that it touches the liner drive roller. Watch the Printer Status screen. When you press the foot switch, the Printer State should change to "Printing". If the status remains on Ready, it means ...
Unfortunately, it is not possible to use a digitally die-cut roll on an applicator. Even with the waste matrix removed, and setting the machine in half-speed mode, the liner is too thick to pull through the applicator. This applies to the following ...
Tip: Click "CC" to enable closed captioning. This will allow you to see the text that goes with the video. It will automatically be translated into the default language set on YouTube. Click the gear icon to change the language of the subtitles.