How do I setup my AP360 or AP362 Label Applicator?

• Related Articles

• The AP-Code Date Coder is not printing. Status is Ready, the container moves, the label is applied but nothing is printed.

  1. Ensure the Roller Track Wheel is installed properly so that it touches the liner drive roller. Watch the Printer Status screen. When you press the foot switch, the Printer State should change to "Printing". If the status remains on Ready, it means ...

• Can I use my digitally die cut label roll on an applicator such as the AP360, AP362 or AP550 (LX610)?

  Unfortunately, it is not possible to use a digitally die-cut roll on an applicator. Even with the waste matrix removed, and setting the machine in half-speed mode, the liner is too thick to pull through the applicator. This applies to the following ...

• How to Create A Custom Label Order

  1. Go to https://www.primera.com/customlabel/generate/label/ 2. Select your printer type. 3. Then click Select Materials. View the material guide for more information on each material type of look at the pictures below. Premium Gloss Matte BOPP High ...

• There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?

  A. Removal: Usually, to remove the stuck label, the printer must be disassembled. This means the unit will need to be brought to Primera for factory service. However, there are ways to remove these labels without disassembling the printer. 1. Use ...

• How do I setup the AP550 Applicator?

  Please watch the setup video for help on this process. Article ID: 99637