How do I run a Tech Support Report (TSR) in PTPublisher? (Mac or PC)

• Related Articles

• How do I gather log files (support report) for Primera Products?

  For PC To gather log files perform the procedure below while the error message is visible in PrintHub.  Also, for best results, run Print Hub as Administrator. Search for "PrintHub" in the Windows Search bar.  Now Right Click on the result and choose ...

• How to use Discover files in PTPublisher 4.0 for OS 10.15 Catalina or higher?

  In PTPublisher 4.0 we were forced to remove Discover disc design software because it was a 32-bit application.  Mac OS 10.15 Catalina only supports 64-bit software so this change was necessary to make PTPublisher compatible.  However, you will still ...

• Can I run my Windows only equipment on a Mac?

  While the driver itself will not work on the Mac, there are some options.  1. Mac Parallels. The LX610 has been tested with Parallels and is fully functional.  Parallels is a virtualization software that allows you to switch to Windows as if you were ...

• How do I gather logging information (Tech Support Report) for Primera Tech Support? (CX1200/CX1000/FX1200)

    How do I gather logging information (Tech Support Report) for Primera Tech Support? (CX1200/CX1000/FX1200)  To create a tech support report, follow these instructions: CX1200/CX1000 1. Open the Status Monitor by going to Start - All Programs - ...

• No Robot Found (Error message received after opening PTPublisher for PC)

  No Robot Found (Error message received after opening PTPublisher for PC) This error indicates that the computer is not communicating with: A. the recorder (burning) drive(s) in the robot and/or B. the printer in the robot. To determine which is ...