How do I Reset the Fuser Counter after Installing a New Fuser? (CX1200)
How do I Reset the Fuser Counter after Installing a New Fuser? (CX1200)
The printer keeps a fuser page counter because as the fuser ages the rubber fusing roller gets softer. This allows it to emanate more heat. To maintain even fuser temperature the printer automatically compensates for this by gradually decreasing fuser temperature in relation to the age of the fuser. Resetting the fuser counter automatically sets the printer back to the highest starting temperature.
1. Go to the Configuration Menu. See instructions below:
2. Select Reset Fuser Cnt.
3. Choose Reset.
4. Switch off the printer and turn it back on.
Important Note: Please change nothing else in this menu.
Related Articles
How do I reset the label counter on my Primera AP550 Flat Label Applicator
By default, the label counter will continue to count every label applied even after you power off the machine. To reset the counter, 1. Power off the AP550. 2. While holding the Recall/Reset button, switch on power. 3. Hold the button until you see ...After a Windows 11 update, My Primera Printer is resetting every 10 seconds or Print Hub is switching between offline and ready -or- the printer does not print at all.
This error can appear in several ways, typically after an upgrade to Windows 11 from a lower operating system: Printer does not print. Job is stuck in the queue but there is no activity from the printer. An audible reset sound can be heard every ...Is there a label counter for the LX800-810?
Is there a label counter for the LX800-810? Yes. This feature is available with the latest version of the LX800 printer driver - version 1.10 PC and 1.1 Macintosh and all versions of the LX810 driver. You may access this feature in the printer driver ...Eddie resets in the middle of a long manual mode print job (Eddie).
In manual mode, Eddie waits for you to press the button on the printer before retracting the cookie for printing. If you wait too long before pressing the button because you were interrupted for some reason or another, Eddie may reset and cancel ...My toner cartridge is defective. The ITU or fuser is defective. What can I do? (CX1000-CX1200)
A. Cartridges B. ITU and Fuser C. Replacement Procedure. A. CARTRIDGES: Contact Primera Technical Support via phone at 763-475-6979 or via email at http://www.primera.com/contact_tech_support.cfm if you experience any of these conditions which might ...