You may need to follow this procedure in one of the following scenarios:
Your labels were made on the wrong size core. Different Primera printers require different core sizes. The two sizes available are 3" cores and 2" cores.
Your labels have a black mark that was printed on the wrong side of the liner.
Your custom shape orientation was created on the wrong side.
Occasionally excess adhesive can ooze out from under the label stock, especially if the roll is wrapped tightly. This can prevent the labels from falling off the back of the roll, creating a slack loop that is essential for proper feeding on the LX ...
Receive error out of paper or end of roll but there are still labels on the core. (LX900-LX810) 1. Labels on the roll may be sticking together. This may prevent the printer from creating a slack loop under the roll. Try a new roll of stock. 2. ...
This issue can be caused by one of the following: 1. The container is not completely round, not smooth or has bumps or ridges. See this article on tapered containers. 2. The labels are applied crooked due to incorrect setup. See this article. 3. The ...
1. Proper Setup. Please follow all of the setup steps in the Manual or the Setup Video. 2. Check for Container Taper. Some containers such as wine bottles may have a slight taper that will cause the label to be applied crooked. You may be able to ...