How do I perform the Calibrate Last Disc procedure required for Bravo II firmware version 1.25 or higher and Bravo XR or OptiVault firmware version 2.07 or higher?
How do I perform the Calibrate Last Disc procedure required for Bravo II firmware version 1.25 or higher and Bravo XR or OptiVault firmware version 2.07 or higher?
The Calibrate Last Disc (PC) or Calibrate One Disc Offset (MAC) utility is found below. Simply download and run the PC utility to run the calibration. For a Mac, first read the instructions and find the Calibrate One Disc Offset section, then run the utility as described in the manual.
Note: If you are upgrading from version 1.25 or higher to the current version this procedure is not necessary. In other words, if you currently have a version lower than 1.25 and you are upgradinging to the current version you must perform this procedure. If you are unsure what version you have, peform this procedure regardless.
Article ID: 44879
Related Articles
PTPublisher for Mac: How to calibrate printer and drive picking depth positions for a Disc Publisher. Fix Error: Multiple discs were placed in the printer or drive tray
1. Open Ptpublisher. 2. Once open at the top next to the apple logo select Ptpublisher then select Calibrate robot... 3. Click Calibrate Disc in Printer if you are getting an error that multiple discs were placed in the printer tray but only one was ...
My Bravo (SE, SE-3, II, XR, XRP, Pro, Xi-Series, 4100, 4200 Series) is not picking discs or is dropping discs?
Where and How is it failing? First, determine exactly where and how the robot is failing to pick. To do this, operate the unit with the cover open. You will need to trick the lid sensor into believing the unit's cover is still closed. Follow this ...
Error - multiple discs have been placed in the recorder or printer but they were not - Problems picking last disc from bin - It says it is empty but it is not - After the last disc is picked, a flashing cartridge light is displayed after checking for a double pick.
For BravoPro Xi, 4100 or 4200 Series Only: 1. In PTPublisher, Go to the Tools Menu - Calibrate the Disc Publisher. (For Mac: Go to the PTPublisher Menu - Calibrate Robot) 2. Find the "Other Calibrations" section at the bottom. 3. If the error ...
When both the Bravo XR and Bravo II drivers are installed the Bravo XR will not print through Discribe. (Mac Only)
When both the Bravo XR and Bravo II drivers are installed the Bravo XR will not print through Discribe. (Mac Only) Both of these printer drivers cannot be installed at the same time if you are printing and burning through Discribe. You must remove ...
PrimoDVD Error - No external drives found -or- The Bravo drive does not show up in "My Computer" (BravoPro, II, XR - PC Only)
PrimoDVD Error - No external drives found -or- The Bravo drive does not show up in "My Computer" (BravoPro, II, XR - PC Only) 1. Plugin Sequence. Try this sequence for getting the PC to recognize the unit's burner drive(s): a. Shutdown (not restart) ...