How do I clean the encoder strip on my Primera Printer?
How do I clean the encoder strip on my Primera Printer?
The encoder strip is a clear plastic strip with small timing marks printed on it, which tell the printer where the print head is located along the horizontal print head path. If it becomes coated with ink, it can interrupt printing activity. It is normal for ink mist overspray to build up here over time. Use this method to safely clean the strip without damaging your printer.
I receive Internal Printer Communications errors or stalls indicated by the flashing Ink Cartridge (left) button. For "Internal Printer Communications" errors or stalls, try the following maintenance procedures: 1. Guide Shaft. Power the Bravo off ...
The encoder strip is a clear plastic strip with small timing marks printed on it, which tell the printer where the print head is located along the horizontal print head path. If it is knocked out of place due to cleaning, transport, or use, the ...
Sometimes the printer will restart if it encounters an error or an interruption in the data flow from the computer over the USB cable. It can be hard to realize that the printer is restarting if you don't see it happen. Instead, at the end of the ...
In most cases, the Bravo Duplicators or LX Series Printers need no regular maintenance. However, there are a few things that can be done when they show signs of ink build-up or label debris build-up. 1. Encoder Strip. Periodically check the encoder ...
Sometimes Eddie will restart if it encounters an error. It often causes issues if this happens because you have a cookie on the tray. (or Cookie + Custom Tray) So when it starts up, it either displays an error OR it will smash the cookie into the top ...