How do I change the unit of measurement on my (AP360-Ap362)?
Related Articles
Colors are printing wrong. Colors are not accurate. Colors are not matching. (Eddie)
There are several possible reasons for colors to print incorrectly. The first step is to print a clean print on your cookie or a cardboard coaster. 1. Print a Clean Print. 2. Print your design or the Clean Print on a Cardboard Coaster or Piece of ...Can I use my digitally die cut label roll on an applicator such as the AP360, AP362 or AP550 (LX610)?
Unfortunately, it is not possible to use a digitally die-cut roll on an applicator. Even with the waste matrix removed, and setting the machine in half-speed mode, the liner is too thick to pull through the applicator. This applies to the following ...How to Create A Custom Label Order
1. Go to https://www.primera.com/customlabel/generate/label/ 2. Select your printer type. 3. Then click Select Materials. View the material guide for more information on each material type of look at the pictures below. Premium Gloss Matte BOPP High ...There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?
A. Removal: Usually, it is necessary to disassemble part of the printer to remove the stuck label. This means the unit will need to come to Primera for factory service. However, there are ways to remove these labels without taking apart the ...How can I print on the far left side of the container using AP-Code with my AP360/AP362 applicator.
The normal print area range of the AP-Code does not allow for printing on the far left side of the container. Typically we would recommend changing the orientation of the your label stock so that you can change the orientation of your container. ...