How can I make LX900 Cartridges work in my Bravo Disc Publisher 4100 series?
As of January 1st, 2026, we have no remaining stock of the original cartridges for the 4100 series Bravo Disc Publisher (53601, 53602, 53603, 53604). Fortunately, another model printer we sold in the past also has the same style cartridges and the same dye ink. With a simple firmware update to your 4100, you can use the LX900 cartridges listed below in your 4100 Series Disc Publisher.
For PC Users
To update firmware, download the firmware updater from the link below and run it. When successfully completed, your firmware should be version 1.13(49). Note: on some PCs, it can take up to 3 minutes for the updater to check your 4100 firmware and appear onscreen. Also, it is important that no errors are present on the printer before the firmware is accepted.
For Mac Users
Follow these instructions to manually update your 4100.
1. Download the files attached to this article to your Downloads folder.
2. Open a Terminal Console. -- (Press 'Command' + 'SPACE') to pull up spotlight search and then type in: Terminal
3. Type this command and press Enter.
lp -d Primera_4100_Series Downloads/UnlockCommand.prn
4. Mac will ask you if you want to give terminal access to Downloads - Click Allow.
5. Now, type this command and press Enter.
lp -d Primera_4100_Series Downloads/Continental_KLM.fls
The 4100 will restart, and the firmware will be updated.
Mixed cartridges
You can mix LX900 and 4100 cartridges in the same print head carrier. It is the exact same ink inside the cartridges, so you should see no difference in print quality.
Article ID: 123125
Related Articles
Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)
This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...No Response. Make sure the Disc Publisher is powered on and the USB cable is connected.
No Response. Make sure the Disc Publisher is powered on and the USB cable is connected. There are several things to check. 1. Local Admin Rights. You must be have local administrative rights to the PC running the Bravo. You may be able to print ...The eSATA card that came with my Blu-ray Bravo Disc Publisher does not work in my iMac, Macbook or PC. (Bravo 4100 Blu Series, Bravo SE Blu, Bravo XRP Blu)
The eSATA card that came with my Blu-ray Bravo Disc Publisher does not work in my iMac, Macbook, MacPro or PC. (Bravo 4100 Blu Series, Bravo SE Blu, Bravo XRP Blu) If the included eSATA PCI express card does not work with your computer either ...Discs are printing with poor quality or missing colors. (4100 Series)
Try the following solutions: 1. Change the Cartridge. Check your cartridge levels. If the lowest percentage color corresponds to a missing color in your print, replace that cartridge. Even if the software reports that the cartridge has 30% ink ...