FX1200 Packaging Instructions
Send only the cutter module. This is typically what needs repair most often. The cutter module can be removed from the FX1200 using the instructions attached below.
The entire FX1200 must be put in a crate and sent via courier. It is very rare that this would be necessary as the system is modular and these modules can be easily swapped by the end user.
Related Articles
CX1200 Packaging Instructions
Send the unit in its original shipping box. Tape the waste toner door closed. Leave the Toner, ITU and Fuser inside the printer. See the packaging instructions below for more details.
AP380/PL400 Shipping Instructions
Power off the unit, wrap the roll bar, roll guides and roll drag arm in bubble wrap or paper. Include the power supply. Secure it inside the box. Include a roll of your label stock and one of your containers for testing! If you are using the original ...
LX3000/LX4000 Shipping Instructions
The Primera LX3000 and LX4000 Color Label Printer uses separate ink tanks that carry ink through an ink tube system. To prevent spills/leaks during shipping, special precautions must be taken. These instructions explain how to seal the ink system ...
How do I send my product in for repair? How much is it? Where do I send it?
Please contact technical support via phone, email, or chat before sending your product in for repair. If they determine that the product needs repair, they will send you a Return Material Authorization (RMA) document, which includes the RMA number, ...
PTPublisher NE Service: How do I completely remove the PTPublisher NE Service installed on the server computer?
PTPublisher NE Service: How do I completely remove the PTPublisher NE Service installed on the server computer? Please use these instructions to completely remove the program. 1. Go to Start - Control Panel - Add/Remove Programs. Find ...