Does the CX1200 or FX1200 have any special power requirements?

Does the CX1200 or FX1200 have any special power requirements?

Does the CX1200 or FX1200 have any special power requirements?

The CX1200 and FX1200 can be plugged into standard 120 volt outlets on the same 15 amp circuit.  Peak amperage is 11.56 amps if both are running together.  If additional equipment will be on the same circuit, it may be advisable to use a 20 amp circuit or dedicate a 15 amp circuit to this equipment.  As with any electronic equipment the units should be plugged into a surge protector rated for their amperage.

Detailed power consumption information can be found below:

CX1200

Idle:
34 – 379 watts.  Peaks at 723 watts
0.59 - 1.01 amps

Running:
129-1050 watts.  Peaks at 1275 watts
1.64-10.22 amps

FX1200

Idle:
40-41 watts
0.50-.51 amps

Running:
106-134 watts.  Peaks at 156 watts
0.92-1.34 amps

Article ID: 77631

    • Related Articles

    • What are the minimum computer specifications required to print to my Eddie printer?

      PC - Specifications/Requirements Ensure the PC specs meet or exceed the following specifications. Windows 8 / 10 / 11 Compatible (32bit/64bit) For PC Pentium Dual Core processor or later. (Typically a PC from 2007 or later) For Mac OS 10.11 or ...

    • My Z1 will not power on.

      My Z1 will not power on. You must plug both the power cable and the USB cable into the back of the Z1.  It requires power from both devices. If you already have it plugged into a USB port, try another port.  Make sure it is not plugged into a hub or ...

    • What are the specific U server space requirements for XR Series products?

       What are the specific U server space requirements for XR Series products? Bravo XR - 4U Bravo XRP - 6U XR Server - 2U XRn - 7U Bravo XR/XRP Kiosk Stand - 3U Article ID: 44988

    • What are the Power Supply Specifications for Primera Products?

      For Bravo, Bravo II, Bravo SE, Bravo SE-3, Optivault, Bravo XR, LX400, LX500, LX810, LX900, LX2000, ADL MAX, AP360/AP362, AP550 and Signature Z6. Input: 100-240 Vac Output: 12Vdc, 5.0A, 60W(max) Polarity: positive = inner / negative = outer (same as ...

    • My AP360 does not power on. What can I do?

        My AP360 does not power on.  What can I do? Switch on the unit and wait 30 seconds – Now press the foot switch to apply a label.  If it doesn’t work toggle the switch the other way and wait 30 more seconds.  Now press the foot switch again to apply ...