The silver discs I am using are laminating with bubbles, pits or speckles. What can I do? There are generally two different types of media available. White media is coated with a matte surface and generally laminates best. "Silver" media has a glossy ...
The laminator is laminating with poor quality. What can I do? Media. The most important factor contributing to poor lamination results is incompatible media. Remember, whether media laminates well has nothing to do with how well it burns or prints. ...
The printer prints only part of either every disc or every few discs when burning and printing CDs or DVDs. The partially printed disc is placed in the finished bin and the job continues normally or stops completely. (MAC only) This is a known issue ...
The laminate is not covering the entire disc. Heat. Try increasing the heat via the temperature slide bar. Ink. If you are printing discs with heavily saturated dark or black areas you may need to wait several minutes to several hours before ...
How many discs can I print with one Z1 ribbon? You can print an average of 200 print areas* with one ribbon. This equals fifty discs if you print all four areas on every disc, 100 discs if you only print two or 200 discs if you print one area on each ...