Cookie Too Tall Error (Eddie)

If you receive this error it means that the cookie is short enough to fit inside the Eddie print area but too tall for the cookie height sensor to see over.  Eddie can't get a good reading on the top of the cookie so the proper print head height can not be set.  

Cookie Height Specifications:

In Manual Mode: 

Height = 1.00" or less including any custom trays.  Remember to measure the height of the the custom tray + the cookie height.

In Manual Mode with the platform kit installed and NO Riser installed:

Height = 1.00" to 2.00" 

Article ID: 101524

• Related Articles

• Error Message: Remove Cookie/Cookie was left in the printer after power up. However, there is no cookie present on the platform. (Eddie)

  If you receive this error after powering up Eddie, follow the steps below. If you receive this error in the middle of printing, it probably means that Eddie needed to restart for some reason, and since it was in the middle of printing when it ...

• Smaller diameter, thin or lighter cookies do not print, the image is overlapping itself, the image is not centered, or Cookie out error. (Eddie).

  The reason for this is not always related to the size but instead, it has more to do with the weight.  These cookies are lighter which can allow the cookie to move slightly as it is being scanned for size.   If the cookie is too small or moves during ...

• What size/type cookies can I print to with my Eddie?

  The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...

• The Top of Cookie Lift Offset setting explained (Eddie).

  The primary purpose of the Top of Cookie Lift Offset is to make your images crisper. It is not necessarily used to prevent your print head from hitting the cookie. Dirt, debris, or ink overspray may be on your encoder strip, cookie sensor, or both. ...

• Cookie Out Error (PC) or Out of Cookies (Mac) (Eddie Edible Ink Printer)

  This error can mean several different things depending on whether there is a cookie on your tray/tongue. 1. Cookie Out Error with Cookie/Object on the tongue/tray. This means the cookie/object is too tall/high. Eddie stops the print job at this point ...