Bravo 4100 firmware is not updating. An error is displayed during the update process.

• Related Articles

• How do I update my firmware, printer driver or software? (LX Series, Eddie and IP60)

  For PC: 1. Open PrintHub 2. Click on Settings 3. Select the Update Tab 4. Click the "Check for Updates" button. Latest Version. If you click Check for Updates and receive the message "No updates Found," you are already on the latest version of the ...

• Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey and Sonoma require new drivers (Mac).

  Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...

• After Firmware Update, Eddie no longer prints directly on my custom tray.

  After updating to firmware version 1.43, It is possible that Eddie will no longer recognize the custom tray as a cookie so you can print test images and calibrations directly to the tray. This is true, especially for Sassy Tray, and Brownbag trays ...

• Print Head Jammed error message displayed in PTStatus2000 software (LX2000).

  This error means that the print head is stuck over the maintenance cap used to seal the cartridge nozzles on the right side of the printer or anywhere along the carrier path.  Try these possible solutions: Remove power from the printer. Disconnect ...

• RIP 900 Service Software Error - Offending Range Check Command. Error displayed on CX1200 control panel. (CX1200)

  RIP 900 Service Software Error - Offending Range Check Command. Error displayed on CX1200 control panel. (CX1200) This indicates that the print resolution setting in the driver is set to something other than the defaults.    To change settings follow ...