Power off the unit, wrap the roll bar, roll guides and roll drag arm in bubble wrap or paper. Include the power supply. Secure it inside the box. Include a roll of your label stock and one of your containers for testing! If you are using the original box you will need to remove the liner rewinder arm to fit it in the box. The liner rewinder arm fits inside a slot at the bottom of the foam packaging insert. Refer to these instructions to remove the liner rewinder arm and package the applicator in its original box. The original box is preferred but if it is not available, remove the liner rewinder arm anyway and wrap it in bubble wrap to make sure it is not damaged in shipping.
The Primera LX3000 and LX4000 Color Label Printer uses separate ink tanks that carry ink through an ink tube system. To prevent spills/leaks during shipping, special precautions must be taken. These instructions explain how to seal the ink system ...
Send the unit in its original shipping box. Tape the waste toner door closed. Leave the Toner, ITU and Fuser inside the printer. See the packaging instructions below for more details.
With the Eddie Platform Kit (SKU 053255) you can print on donuts, bagels, bars, or other larger treats! The maximum item size is 4.5” (114.3mm) wide x 8” long x 2” (50.8mm) high. The kit contains: A platform tray for items 1” (25.4mm) - 2” (50.8mm) ...
How do I prepare my unit for shipping to Primera for repair or exchange? The instructions below should be followed for each product before boxing. It is best to use the original box and foam/cardboard supports. If you do not have the box, package ...
If the text looks garbled, make sure the DPI in the settings area is set to 600 DPI. Any recently purchased AP-Code requires the 600 DPI setting. Older AP-Codes may require 300 DPI. See the screen capture below for details. If you are not sure what ...