Alignment Failed - Incorrect Cartridge Installed - Error received after alignment is printed (Bravo SE - Mac)
Alignment Failed - Incorrect Cartridge Installed - Error received after alignment is printed (Bravo SE - Mac)
1. Try to print after you receive this error. If you are able to print, you can ignore this error. The error will not affect your ability to print with this cartridge.
2. If you are not able to print and you continue to receive prompts to align the cartridge, you may have a defective cartridge. Try a new cartridge.
3. If a new cartridge does not solve the problem, try the following:
A. From the Configuration Utility, click the Clean Cartridge button.
B. If the Clean Cartridge Print succeeds, now click the Align Cartridge button.
The clean cartridge print may clear the USB port for the Alignment Print.
4. Rights/Permissions. There may be insufficient permissions to the Hard Drive - Library - Printers - Primera folder and subfolders. Make sure you have full access to this folder. See this article for instructions.
5. Finally, if all of these suggestions fail you may disable the requirement for the alignment print on all new cartridges. Use the following instructions:
a. Go to the Macintosh HD - Library - Printers - Primera - Disc Publisher SE folder.
b. Select the DiscPubSECfg file. (Do not confuse this file with the DiscPubSEConfig utility)
c. Right Click or Control+left click on this file to display a menu. Choose "Open With" - "Other" from the menu.
d. The applications folder will open. Scroll to the bottom of the list. Choose TextEdit. Click Open.
e. Find the Ignore Align key. Set the integer value to 1.
<key>IgnoreAlign</key>
<integer>1</integer>
f. Close the file and click Save when it prompts you to save it.
Article ID: 45027
Related Articles
Missing Cartridge, Invalid Cartridge, Incompatible Cartridge, Incorrect Cartridge, Cartridge not installed correctly, or Cartridge Data Error (LX600, LX610, LX910, Eddie, LX3000 or IP60)
If the cartridge is installed, but this error appears, it may be caused by insufficient contact between the cartridge and the carrier. Try the following: A. Verify the correct Part Number Cartridge for your printer is installed. 53491/53496 = ...
Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...
Received message "Invalid Cartridge" after inserting a new cartridge in the Bravo SE.
Received message "Invalid Cartridge" after inserting a new cartridge in the Bravo SE. The Bravo SE accepts two types of genuine Primera cartridge: Part # 53335 - High Yield Cartridge. (Requires latest, software, firmware and driver) Part # 53332 - ...
Missing Cartridge or Invalid Cartridge Error message received in PTPublisher. (Bravo 4100 Series Publisher)
Error Message - The color cartridge is invalid/missing. Open the cover and press the left button. Change the cartridge and close the cover. Yellow/Cyan/Magenta/Black Cartridge Invalid / Missing. Note: If the last part of this error message which ...
LX 2000/ LX 1000 - Error Message: failed printhead, printfailure impropershutdown
LX2000 - Error Message: failed printhead, print failure improper shutdown Solution 1: Perform a print head alignment described below. This will clear and resolve the mentioned error message and allow you to print. Solution 2: Install a new print ...