After turning on the power a slow flashing light appears after the Bravo SE has completed its initialization procedure (Bravo SE).

• Related Articles

• The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)

  The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)   The blinking power light indicates that the unit has a cartridge problem. There ...

• I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin.

  I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin. This problem can be caused by several things. 1. SureThing label setup. You may have a problem with how you ...

• Labels are fed through the printer 24 inches at a time resulting in a flashing power LED light.

    Labels are fed through the printer 24 inches at a time resulting in a flashing power LED light. The LX400 is not properly sensing your label stock. Check the following settings: SENSOR TYPE SETTING. Make sure the sensor type setting in the printer ...

• Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey and Sonoma require new drivers (Mac).

  Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...

• After each disc that I laminate, the Power light starts flashing. If I open and close the cover, I can laminate another disc but the power light starts flashing again.

  After each disc that I laminate, the Power light starts flashing.  If I open and close the cover, I can laminate another disc but the power light starts flashing again. There may be a problem with the laminate film or the sensor.  Try a new roll of ...