Adobe Photoshop prints one copy and then stops even though multiple copies were sent to the printer (Eddie and LX Series Printers).

• Related Articles

• LX Series Printer prints only one copy of a multiple copy job and then stops when printing from Corel Draw. (LX400-800-810-900)

  LX Series Printer prints only one copy of a multiple copy job and then stops when printing from CorelDraw. (LX400-800-810-900)   LX series printers require a document to be sent to the queue several times to print multiple copies. To print without ...

• Poor Print Quality, Blurry Printing, Print Smearing, faded prints, or splotchy prints on my Cookie or Food Item. (Eddie)

  1. Clean the Cartridge. Follow the procedures in this article to clean the cartridge. However, instead of using alcohol to clean the cartridge, use distilled or bottled water. Tip! Leave the printer powered on when it is not in use to maintain ...

• How should label stock rolls be wound to work with the AP360/362/550 Applicator or LX Series Printer?

  Labels must be "wound out" for all Primera Printers and Applicators!   Orientation depends on the type of container you are using.    For the AP362/360: most round containers will use Copy Position 3 or 4. For the AP550: containers can be rotated to ...

• How to print Red with Eddie Edible Ink Printer.

  Update 09-21-22. A new cartridge with new magenta that prints a better red is now available. SKU 053507. To order select New Magenta from the menu on this page. If you have the original 053498 Cartridge you can still use these instructions to get a ...

• LX Series Printer prints a partial label and restarts/resets in the middle of a job. (LX910, LX3000)

  Sometimes the printer will restart if it encounters an error or an interruption in the data flow from the computer over the USB cable. It can be hard to realize that the printer is restarting if you don't see it happen. Instead at the end of the job, ...