Normally, the paper out error indicates that you are at the end of a roll of label stock. You will need to load another roll of media in the printer. If the media is loaded, and the error appears when you send at print, or the error appears at ...
The LX2000 is not properly sensing the gaps between the labels on your label roll. (TOF = Top of Form) Check the following settings: Try pressing the "Resume/Feed" button on the front of the printer. If the error continues, press the “Cancel” button ...
When you insert digital die-cut media you should see an icon in the upper left corner of print-hub indicating you have Digital Die-Cut Media and a corresponding percentage remaining. If you do not see the icon make sure your media is digital die-cut ...
Issue. Wear strip is too thick, too wide or improperly installed which causes it to protrude too high into the paper path. This will prevent the label stock from feeding into the printer. It gets stuck right before the wear strip. If the wear ...
Paper Jam Error 250.15 MP Feeder Door (CX1200) A. This error indicates a paper jam at the MP Feeder Door. Please clean the following parts on the door with isopropyl alcohol and a lint-free cloth. (See picture below) Feed Roller (Replacements can ...